20 Easy Ways to Save Money on Your Water Bill

Of Canada’s domestic water use, 35% goes toward bathing. Filling the bathtub just halfway takes about 200 litres, but you can save by filling the tub only a quarter of the way.

You use about 9.5 litres of water per minute when you take a shower. Make taking a bath a once-a-week treat and shower the rest of the time.

If you stand under the shower for 20 minutes, you use almost as much water as you would have if you filled the bathtub halfway. Spend less time in the shower and you’ll be using much less water.

According to Hydro One, an energy-efficient, low-flow showerhead reduces the water flow by between 40 and 60%. That can save you more than 28,000 litres of water in a year.

Insulating your hot water pipes can reduce the amount of time you need to wait for the water in the shower to warm up. However, you can also save that “wait water” in a bucket and use it for something else, such as cleaning, flushing the toilet or watering the plants.

Instead of letting the water run, turn off the tap while you’re brushing your teeth, shaving or washing your hands. Then turn it back on to rinse.

Hydro One says that faucet aerators can reduce your water consumption by 25 to 50% per tap. They do this by mixing air into the water coming out of the tap, giving you a strong flow while you’re actually using less water.

Direct Energy says that your toilet uses between 1 and 16 litres of water per flush. In fact, toilet flushing makes up 30% of a Canadian household’s water consumption. Place a bottle filled with water or special tank bag in your toilet’s cistern to displace the water level and let you flush with less water.

A dual-flush or low-flow toilet uses less water than a conventional one. With a dual-flush toilet, you can adjust the amount of water you need for flushing, depending on what you need to flush away.

About 20% of a household’s water use is for doing the laundry. Instead of doing small loads of laundry every day, wait a few days and do one big load. However, only fill the machine to about three quarters full or it will work less efficiently.

If you have very dirty laundry to get clean, pre-soak it first. That way, you won’t have to wash the same load twice and you’ll save water and electricity.

An ENERGY STAR washer uses up to 40% less water than a conventional model, according to Hydro-Québec. In addition, the newer ENERGY STAR models use about half as much water as those made before 2007.

Hydro One says that an ENERGY STAR dishwasher can be 50% more efficient than a regular one. It will save not only water but electricity as well.

Only run your dishwasher for full loads and then run it on the shortest possible cycle. Instead of rinsing your dishes and cutlery before loading them into the dishwasher, scrape them off and let the washer do the rest.

Choose native or drought-tolerant plants for your garden and reduce the size of your lawn, which is a water guzzler. Spreading mulch around the base of plants will reduce evaporation and you’ll need to water less often. Choose shady spots for plants that need more water to reduce evaporation.

The best times to water your garden are in the early morning, late afternoon or evening. If you water in the middle of the day, the heat of the sun will evaporate the water.

Grey water is wastewater from sinks, showers, bathtubs, washing machines and appliances such as dishwashers. It’s a great option for watering the garden and is even better for your plants when you use biodegradable soaps or detergents.

Place a tank, barrel, large bucket or tub at the bottom of a downspout for collecting rainwater. You can then use this water in the garden on sunny days or even use it for cleaning or for flushing the toilet.

A sprinkler system is convenient but can waste astonishing amounts of water. With fine-mist systems, nearly half the water will evaporate before it even makes it to the ground. If you choose to use a sprinkler system, set it on a timer so that you don’t over-water the garden.

The constant dripping from leaky taps and toilets can quickly add up and if your water bill suddenly soars, it may be a sign that there’s a leak somewhere. Regularly check your taps, toilets, water supply valves and pipes for signs of leakage and fix any problems as soon as possible.